Run Hydrog
===================

Hydrog is a post-processor  program  to  display  channel  and  cross  section
hydrographs.

.. note:: The project folder must have a CONT.DAT file to run Hydrog.  A complete simulation with either a channel,
          floodplain cross sections, or hydraulic structures results.

.. note:: Hydrog functions are all available using the FLO-2D Plugin.


Run Hydrog
---------------

The Run Hydrog button will load the Hydrog executable in the Project Folder.

1. Click on the Run Hydrog.

.. image:: ../../img/Buttons/run006.png

2. Hydrog will open.

3. Use it to show hydrographs for channel cross sections.

.. image:: ../../img/Run-Hydrog/runhydrog001.png

4. Use the selector window to select the channel cross section to plot and the up down buttons to move upstream
   or downstream.

.. image:: ../../img/Run-Hydrog/runhydrog001a.png

5. Use it to show hydrographs for floodplain cross sections.

.. image:: ../../img/Run-Hydrog/runhydrog002.png

6. Use the selector window to select the floodplain cross section to plot and the up down buttons to move up or down
   the cross section list.

.. image:: ../../img/Run-Hydrog/runhydrog002a.png

7. Use hydrog to show hydrographs for hydraulic structures.

.. image:: ../../img/Run-Hydrog/runhydrog003.png

8. Use the selector window to select the hydraulic structure to plot and the up down buttons to move up or down
   the structure on the list.

.. image:: ../../img/Run-Hydrog/runhydrog003a.png